Find Castel Type ODF/SAE 1/4'' Solenoid Valve, CASTEL Type Refrigerator Brass Solenoid Valve, CASTEL Type MSV-1020/2 Electromagnetic Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Refrigeration parts > MSV-1020/2 CASTEL Type Refrigeration Solenoid Valve

MSV-1020/2 CASTEL Type Refrigeration Solenoid Valve

MSV-1020/2 CASTEL Type Refrigeration Solenoid Valve

    Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 1 Set/Sets
    Delivery Time: 5-7 Days
    Packaging: Pallet,Carton,Box
    Productivity: 1200 sets/ per week
    Brand: Brando
    Transportation: Ocean,Land,Air
    Place of Origin: Ningbo China
    Supply Ability: 5000 /set per month
    Certificate: CE & GB
    Port: Zhoushan,Dalian,Tianjin

Basic Info

Model No.: MSV-1020/2

Product Description

MSV-1020/2 CASTEL Type Refrigeration Solenoid Valve


When selecting, the diameter of MSV refrigeration solenoid valve of the same size as the pipeline should be configured according to the size of the pipeline of the cold storage Refrigeration Equipment. The material of MSV solenoid valve body should be compatible with the center of the pipeline; the operating voltage should be consistent with the supply voltage.


Different types of MSV electric solenoid valves should be used for different work locations. MSV refrigerator Solenoid valves such as refrigerant lines cannot be used in water lines because water can foul and inevitably have solid impurities, which can easily block small balance holes on the diaphragm.
The MSV electromagnetic valve used on the oil return pipe of the oil separator should have anti-vibration measures to prevent the fluctuation of the compressor discharge pressure from affecting the opening and closing of the auxiliary valves.


The MSV refrigerant control solenoid valves for suction pipes are required to be dew condensation, so use a moisture-proof coil or a closed solenoid valve. When the ambient temperature is higher than 40 °C, use a heat-proof coil or the like.


Technical data chart of MSV-1020/2 CASTEL Type Refrigeration Solenoid Valve:

Model No. MSV-1020/2 type
Connection SAE G1/4'' Inch
Refrigerant R407C, R410A, R22, R134a
Media temperature -40℃-105℃
Max. opening pressure 25 Bars
Min. opening pressure 0.5 Bars
Working pressure 30 Bars
K V Value 0.175 m³/h
Height 75 mm
Length 58 mm

Hot gas, liquid and suction line Castel Type ODF/SAE 1/4'' Solenoid valve:

MSV hot gas,liquid and suction line solenoid valve ODF or SAE 1/4'' Two Connection types


Manufacturing of CASTEL Type Refrigerator Brass Solenoid Valve:

Manufacturing of MSV-1020/2 refrigeration solenoid valve in R12,R22,R134a,R404,R407C,R410,R502 Gas Line


Packing of CASTEL Type MSV-1020/2 Electromagnetic Valve:

Packing of MSV-1020/2 diaphragm refrigerator solenoid valve AC or DC solenoid coils


What are the requirements of supermarket fresh cabinet with MSV-1020/2 CASTEL Type Refrigeration Solenoid Valve?

1, the supermarket fresh cabinet material should be better:

All the evaporation tubes of the high-quality supermarket fresh-keeping cabinets are made of high-quality copper coils and processed into wide-faced shapes. The surface of the stainless steel plate is smooth and clean, and the whole plate is even and thin. The proper thickness ensures the long service life and makes the fresh-keeping cabinet look flat and firm. The copper tube has better cooling effect than the aluminum tube or the composite tube, and has better corrosion resistance. The high-quality copper coil has the advantages of high cleanliness inside the tube and few joints, and can effectively prevent leakage or clogging failure in the refrigeration system. The circular tube is processed into a rectangular shape, so that the contact between the evaporation tube and the cold-passing inner liner is brought into surface contact by the point contact, the transfer area is enlarged, and the cooling speed can be accelerated.

2, the supermarket fresh-keeping cabinet should has better insulation effect:

The advantages and disadvantages of the insulation performance of the insulation layer in the production process of the fresh-keeping cabinet are not only an important quality index of the fresh-keeping cabinet, but also an important factor in the economical use of the fresh-keeping cabinet. In order to achieve good thermal insulation properties, the appropriate raw materials must be selected to control the bulk density and cell diameter in the optimum range. Therefore, only by adopting the ability to regulate the material temperature, with special fixtures, and mastering the mature foaming process, it is possible to produce a fresh-keeping cabinet with good thermal insulation effect.

3, the supermarket fresh-keeping cabinet structure should be strong:

The structural firmness of the supermarket fresh-keeping cabinet is directly related to the length of use of the fresh-keeping cabinet. There is an integral angle steel frame support between the outer casing and the inner tank of the high-quality supermarket fresh-keeping cabinet, and its function is equivalent to the reinforcement of the cement pre-formed board, and the firmness is greatly increased. After the door frame is completely welded and formed, the whole body is foam-formed at one time, which avoids the defect that the door frame is not tightly assembled and the door is easy to fall off. The advantages of one-piece forming of the integral steel frame are obvious. Why are other manufacturers not using it? Because the fixture requirements are complex and the clamping is difficult, it is not a manufacturer that cares for the interests of consumers. It is impossible to adopt this structure and process.


Welcome to your inquiry!

NINGBO BRANDO HARDWARE CO.,LTD

 


BRANDO is one of leading manufacturers of solenoids, armature assembly, and Solenoid Valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.

4


BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.

1


BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
6


BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.

2


Quick review of BRANDO products:

valve

valves2

pulse valve

armature and coils



Company Info

  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters

Premium Related Products